Eye Candy 1 HR Fast Cure Resin

Ultra-Fast Cure Time
Handle and demold projects in as little as ~1 hour depending on conditions.

Crystal Clear Finish
Produces a clean, high-gloss surface that enhances color, detail, and depth.
Self-Leveling Formula
Flows smoothly across surfaces to create even, professional finishes.

Production-Ready Performance
Ideal for makers producing multiple pieces or working on tight timelines.

Precision & Efficiency
Short working time allows for quick, repeatable results in controlled applications.

1. Measure resin and hardener at a 1:1 ratio by volume
2. Mix thoroughly for 2–3 minutes
3. Apply immediately after mixing
4. Pour or spread evenly across your surface
5. Remove bubbles quickly using light heat if needed
6. Allow epoxy to cure undisturbed
Working Time: Short (minutes, varies by temp)
Handle/Demold Time: ~1 hour
Recommended Temperature: 70–75°F
This is a fast system—have everything ready before mixing.

• Pre-stage your entire project before mixing
• Mix small batches to avoid rapid heat buildup
• Apply immediately—do not let epoxy sit in the container
• Work in a controlled temperature environment
• Use quickly for best leveling and finish
• Avoid overworking the surface
Fast cure epoxy gives you speed—but requires precision and planning.

Eye Candy 1 Hour Fast Cure Epoxy works with:
• Mica powders
• Pigment pastes
• Liquid dyes
Best For:
• Solid color applications
• Simple designs
• Controlled pigment use
Due to the extremely fast cure, pigments will have minimal movement.

• Mix Ratio: 1:1 (by volume)
• Working Time: Very short (minutes)
• Demold/Handle Time: ~1 hour
• Full Cure Time: 24 hours
• Recommended Temp: 70–75°F
• Application: Coatings, crafts, small pours
• Finish: High gloss, crystal clear
• Viscosity: Medium-low (self-leveling)

General Questions

What is the mix ratio?
This epoxy uses a 1:1 mix ratio by volume.

How fast does it cure?
You can handle or demold projects in about 1 hour under ideal conditions.

Is this beginner friendly?
This epoxy is best for users who can work quickly and efficiently due to its short working time.

Application & Performance
Why did my epoxy cure too fast?
This is a fast cure system. High temperatures and large batches will accelerate the reaction even more.

Why didn’t my epoxy level properly?
Fast cure epoxy has limited working time. If not applied quickly, it may begin curing before fully leveling.

Can I use this for thick pours?
No. This epoxy is designed for thin applications, coatings, and small projects.

Pigments & Effects

Can I use pigments?
Yes. It works with mica powders, pastes, and dyes.

Will pigments move or create effects?
No. The fast cure limits movement—this epoxy is best for controlled color applications.

Project Use

What is this epoxy best for?
• Jewelry
• Crafts
• Coatings
• Small projects
• Production work

Can I use this for river tables or deep pours?
No. Use Eye Candy Deep Pour Epoxy for those applications.

Safety & Handling

What temperature should I work in?
70–75°F is recommended.

Do I need protective gear?
Yes—always wear gloves and work in a ventilated area.

• Safety Data Sheet (SDS) available upon request
• Use in a well-ventilated area
• Wear gloves and protective gear
• Avoid skin and eye contact
• Store in a cool, dry place