Pumpkin Molds |4 Shapes | Halloween Molds

FINAL CAST DIMENSIONS:
Tall Pumpkin: Approx. 2.5" in diameter and 4" tall
Short Pumpkin: Approx. 3.75" in diameter and 2" tall
Mini Pumpkin: Approx. 1.5" in diameter and 1.5" tall.
Flat Keychain Pumpkin: Approx. 2 1/4" x 2", 1/4" deep

This listing is for an assortment of pumpkin molds. All have a shiny, glossy finish.

The bigger pumpkins are DEEP molds. Please check your resin's maximum thickness to avoid an exothermic reaction.

Resin work done by @mlcresindesigns

This listing is for the silicone mold ONLY.

Please message us with any questions you may have regarding this mold.


All molds are handmade and inspected before shipping. 

Our silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.

SILICONE MOLD CARE INSTRUCTIONS

• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.
• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.
• USE EXTREME CAUTION when using a torch/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of
alcohol over the resin.
• Make sure the resin is fully cured. Uncured resin may rip the mold.
• Please follow all safety precautions when using resin. It is very toxic.
• Plastic Wrap/Bag Marks on trays will go away within 48-72 hours.
• All torso molds come pre-split to allow for easy demolding of your resin piece. Use the rubber bands to aid you to seal the split upon pouring.
• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.

PLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.

We take pride in crafting high-quality silicone molds and want you to be completely satisfied with your purchase. Please note that we do not accept returns or exchanges. However, if there is a manufacturing defect or an issue on our end, we will promptly address and resolve it.

Cancellations are accepted only if requested before the mold is made—once production begins, orders cannot be canceled.

Shipping Time:
Orders typically ship within 1-5 business days, but during periods of high demand, processing times may be slightly longer. We appreciate your patience and strive to deliver your molds as quickly as possible.

If you have any questions or concerns, feel free to reach out—we’re here to help!

To request a SDS, please email us at jeff@eyecandycustomz.com