Deep Round Mold | 4 Sizes |

Final Cast Dimensions:
Diameter: 12", 14", 18" or 24"
Depth: 3"
Surface Finish: Smooth/Shiny/Glossy

This listing is for a Deep Round Molds. We are offering this in 4 sizes - 12", 14", 18" and 24". All 3" Thick. 


Resin work and photos courtesy of @pkwooddesign and @crystal.seas.art

We suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin/matte which directly transfers to your casting. 
Please message us with any questions you may have regarding this mold.

**Please note this listing is for the silicone mold ONLY.

All molds are handmade and inspected before shipping.

Our silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.

SILICONE MOLD CARE INSTRUCTIONS

• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.
• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.
• USE EXTREME CAUTION when using a torch/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.
• Make sure the resin is fully cured. Uncured resin may rip the mold.
• Please follow all safety precautions when using resin. It is very toxic.
• If you have further questions or concerns about your mold, please shoot me a message  and I’ll get you taken care of.

PLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.

We take pride in crafting high-quality silicone molds and want you to be completely satisfied with your purchase. Please note that we do not accept returns or exchanges. However, if there is a manufacturing defect or an issue on our end, we will promptly address and resolve it.

Cancellations are accepted only if requested before the mold is made—once production begins, orders cannot be canceled.

Shipping Time:
Orders typically ship within 1-5 business days, but during periods of high demand, processing times may be slightly longer. We appreciate your patience and strive to deliver your molds as quickly as possible.

If you have any questions or concerns, feel free to reach out—we’re here to help!

To request a SDS, please email us at jeff@eyecandycustomz.com