Eye Candy Table Top Epoxy

A great project deserves a finish that shows off every color and creative detail, and Eye Candy Table Top Epoxy delivers. Its crystal-clear, self-leveling formula creates a smooth, glass-like surface. Use our table top epoxy for both small creative pieces and larger surface projects. With a 1:1 mix ratio, it’s easy to get consistent results.

Eye Candy Table Top Epoxy works beautifully with mica powders, pigment pastes, dyes, and metallic or special-effect pigments. It releases trapped air effectively to achieve a cleaner finish with fewer surface imperfections. The durable high-gloss finish resists moisture and everyday wear on compatible surfaces, including wood, concrete, metal, and canvas. Keep this table top epoxy resin on hand for projects that require reliable performance and creative flexibility.

Crystal Clear Finish
Achieve a glass-like, ultra-clear coating that enhances depth, color, and detail in every project.

Self-Leveling Formula
Flows evenly across your surface, eliminating uneven spots and creating a smooth, professional
finish.

Excellent Bubble Release
Engineered to allow trapped air to escape easily during application, helping reduce surface imperfections.

High Gloss Durability
Cures to a tough, glossy finish that resists moisture, scratches, and everyday wear.

Easy 1:1 Mixing Ratio
Simple equal-part mixing makes it easy for anyone to get consistent, reliable results every time.

Multi-Surface Application
Works on wood, concrete, metal, canvas, and more—making it ideal for a wide range of projects.

Food-Safe When Fully Cured
Suitable for surfaces like countertops and tables once properly mixed and cured.

1. Measure equal parts of resin and hardener (1:1 ratio)
2. Mix thoroughly for 3–5 minutes, scraping sides and bottom
3. Apply a seal coat if working with porous surfaces like wood
4. Pour your flood coat evenly across the surface
5. Use a heat source (torch or heat gun) to remove bubbles
6. Allow epoxy to self-level and cure undisturbed
⏱ Full Cure Time: Approximately 72 hours
🌡 Recommended Working Temperature: 70–75°F

• Always work in a clean, dust-free environment
• Avoid pouring over oil-based paints or stains—this can cause separation or defects
• Seal porous surfaces first to prevent bubbles from escaping into your flood coat
• Mix slowly to avoid introducing excess air
• Use controlled heat to remove bubbles—do not overheat
• Maintain consistent room temperature during curing
💡 Following proper prep and mixing steps will significantly improve your final results

Eye Candy Table Top Epoxy is designed to work seamlessly with a wide range of color systems.
Compatible with:
• Mica powders
• Pigment pastes
• Liquid dyes
• Metallic and special effect pigments
Create:
• Deep, rich solid colors
• Metallic movement effects
• Translucent and layered designs
• Custom artistic finishes
💡 Start with small amounts of pigment and build to your desired opacity.

• Mix Ratio: 1:1 (by volume)
• Working Time: ~30–45 minutes (varies by temperature)
• Full Cure Time: ~72 hours
• Finish: High Gloss
• Application Thickness: Flood coat application (typically 1/8")
• Temperature Range: 70–75°F recommended
• Resistance: Water, impact, and blush resistant
• Clarity: Crystal clear, non-yellowing formula (when used as directed)

General Questions
What is the mix ratio for Eye Candy Table Top Epoxy?
This epoxy uses a simple 1:1 mix ratio by volume—equal parts resin and hardener.

How long does it take to cure?
You can expect a full cure in approximately 72 hours. The surface may be tack-free sooner, but full hardness takes time.

What temperature should I work in?
For best results, work between 70–75°F. Lower temperatures can slow curing and affect clarity, while higher temperatures can shorten working time.

How thick can I pour this epoxy?
Table Top Epoxy is designed for thin applications such as flood coats, typically around 1/8" per layer.

Application & Results
Why is my epoxy cloudy or hazy?
Cloudiness is usually caused by:
• Moisture contamination
• Low working temperatures
• Improper mixing

Why am I getting bubbles in my epoxy?
Bubbles can come from:
• Mixing too fast
• Pouring on porous surfaces without sealing
• Air trapped in wood

Do I need to apply a seal coat?
Yes, especially on wood or porous materials. A seal coat helps prevent air from escaping into your flood coat.

Why is my epoxy not curing properly?
This is typically caused by:
• Incorrect mix ratio
• Incomplete mixing
• Low temperatures

Can I apply a second coat?
Yes. You can apply another coat once the previous layer has cured or is still slightly tacky.

Surface & Compatibility
Can I pour epoxy over paint or stain?
Avoid oil-based products. These can cause defects such as fisheyes or separation.

What surfaces can I use this on?
Wood, concrete, metal, canvas, and most sealed surfaces.

Is this epoxy food safe?
Yes—once fully cured, it is suitable for surfaces like countertops and tables.

Pigments & Creativity
Can I add pigments to this epoxy?
Yes. It is fully compatible with mica powders, pigment pastes, and dyes.

How much pigment should I use?
Start small and gradually increase until you reach your desired color.

Will pigments affect curing?
Not when used properly. Avoid adding excessive amounts.

Durability & Performance
Is this epoxy scratch resistant?
It is highly durable but not completely scratch-proof.

Is it waterproof?
It is water-resistant and protects surfaces from moisture.

Will it yellow over time?
Designed to remain clear, but prolonged UV exposure may cause slight yellowing over time.

Storage & Safety
How should I store unused epoxy?
Store in a cool, dry place with lids tightly sealed.

Do I need protective gear?
Yes—wear gloves and work in a well-ventilated area.

Is this safe to use indoors?
Yes, when used in a properly ventilated space.

• Safety Data Sheet (SDS) available upon request
• Always wear proper PPE (gloves, eye protection)
• Use in a well-ventilated area
• Avoid contact with skin and eyes
• Store properly when not in use