Beni Red

SKU: ECC-01516-05
Size
Price
Regular price $6.00
Regular price Sale price $6.00
Save $-6
/

Earn [points_amount] when you buy this item.

  • In stock, ready to ship
  • Backordered, shipping soon
  • Highest Quality Products
  • Cruelty Free
  • Secure payments

This online store is secured by Shopify

Shopify Secured

ALWAYS TEST BEFORE FULL APPLICATION!

Beni Red is a Red based pigment and part of our Glow Series line.

Expose the Glow in the Dark pigments to light in order to charge the pigments.

GLOW TIME PER CHARGE - Unlike other brands, our Glow in the Dark pigments should last 8-10 hours per charge.

Mixing other pigments with the Glow in the Dark pigments will work BUT they will significantly decrease the ability to glow.

Compared to normal pigments, Glow in the Dark pigments have a heavier density and requires a smaller jar which may make it appear there's less.

Glow in the Dark mica powder is ideal for DIY craft use, such as, epoxy, resin, woodworking, pen blanks, plastics, slime, watercolors, cosmetics, fishing lures, bath bombs, jewelry, melt and pour, acrylic, polish, candle making, and MUCH more.

Particle size : 30-50 μm

Ingredients : Strontium Aluminate, Polyurethane-11, Red 28

Heat Threshold : 752 °F - 1112 °F

Product Type : Mica
Vegan : Yes
Soaps : Yes
Epoxy Resin : Yes
Acrylic : Yes
FDA-Permitted for External Use : Yes
FDA-Permitted for Eye Area Use : No
FDA-Permitted for General (Including Lips) Use : No
FDA-Permitted for Bath Bombs Use : No

NOTE: External use applies to facial make up and nail polish. Bath Bombs fall under the Lips category.

Are you having a difficult time mixing the pigments or just find yourself stirring and stirring? Or even worse, finding tiny specs in your finished product? This is mostly the cause of not mixing and breaking down the pigment enough.

Due to the granular nature of specialty pigments such as neons, glow in the dark, etc. these pigments are typically a little more difficult mix and breakdown.

If this is the case, place the pigments in a small cup, use denatured alcohol and wet the pigments, stir until it has a consistency of a paste. Stir until they break down.

Epoxy : 2 grams per 8 ounces

The most common question that we receive is “How much pigment per gallon of epoxy?” This is a very valid question and unfortunately there is no set answer due to the numerous types of applications and variations. This is why we recommend 2 grams per 8 oz and add as desired.

For example: Are you looking for an opaque or transparent look? Lighter colors may take more pigment to achieve the color.


Why micron sizes matter:

PLEASE be aware of the micron sizes of the pigment. The larger the micron, the larger the particle.

Typical pigments average 10-60um.

Be aware that larger micron sized pigments will most likely have a heavier density which will cause the pigment to sink faster in fresh epoxy such as deep pours. For example, our Icicle or 14k Nugget Gold is 200-700um and will most likely sink in fresh epoxy faster. To alleviate sinking either let the epoxy settle up a little bit. Or, come back through your project to “stir” it a little more.

Due to the granular nature of specialty pigments such as neons, glow in the dark, etc. these pigments are typically a little more difficult mix and breakdown.

If this is the case, place the pigments in a small cup, use denatured alcohol and wet the pigments, stir until it has a consistency of a paste. Stir until they break down.

Cold process - 2 tsp per lb of oils

Hot process - ½ tsp lb of MP base

DO NOT USE! Glow pigments are not recommended for automotive use because they have low UV resistance. This means that when exposed to sunlight for extended periods, the pigments may fade or lose their vibrancy over time. UV rays can cause the colors to deteriorate, which is why these pigments are best used in applications that are not subject to prolonged sunlight exposure.

Courtesy from our friend Justin Salley.
For more tutorials, visit his Youtube page www.youtube.com/@justinsalleyart/

STEP #1 - MIX YOUR POURING MEDIUM
3 parts Behr8300 Deep Base Interior/Exterior Hi-Gloss Enamel. 1 part JOSONJA Polyurethane Water Based Gloss Varnish. Mix gently folding paint and varnish together until they are completely mixed, Go Slow to reduce mixing bubbles.

STEP #2 - DISPERSING PIGMENTS INTO YOUR MEDIUM
Pour 1/2 to 1 teaspoon of JOSONJA Gloss Varnish into mixing container. Add around a teaspoon of Pigment (I generally add a little more) into your container with the JOSONJA. Mix until all Pigments have dissolved into a liquid making sure to stir any clumps out at this time.

STEP #3 - COMBINING YOUR POURING MEDIUM & DISPERSED PIGMENTS
Add around 3 Tablespoons of Pouring medium into your Dispersed Pigments. Mix thoroughly, being slow and folding rather than whipping, this will minimize the air bubbles.

STEP #4 - WHAT IF?
◦ If your new mixed color seems to thick - Add a small amount of JOSONJA and stir until you reach the desired consistency.
◦ If your new mixed color seems to thin - Add a small amount of Behr8300 (ONLY) and stir until you reach the desired consistency.

To request a SDS, please email us at jeff@eyecandycustomz.com

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

You may also like

Customer Reviews

Based on 3 reviews
33%
(1)
67%
(2)
0%
(0)
0%
(0)
0%
(0)
B
BO$$
Not really red..

More of a deep/bright orange. Regardless, it’s still beautiful and I will continue using Eye Candy.

P
Pam

Fast delivery but have not used this product yet.

D
Debra

The glow is fantastic

Recently viewed