Products

FINAL CAST DIMENSIONS:

This listing is for 1" Deep Rectangle Molds. There are 8 different sizes available. These molds are ULTRA Quality and Long Lasting!

We suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin/matte which directly transfers to your casting.

Please message us with any questions you may have regarding this mold.

**Please note this listing is for the silicone mold ONLY.

Our silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.

SILICONE MOLD CARE INSTRUCTIONS

• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.
• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.
• USE EXTREME CAUTION when using a torch/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.
• Make sure the resin is fully cured. Uncured resin may rip the mold.
• Please follow all safety precautions when using resin. It is very toxic.
• Plastic Wrap/Bag Marks on trays will go away within 48-72 hours.
• All torso molds come pre-split to allow for easy demolding of your resin piece. Use the rubber bands to aid you to seal the split upon pouring.
• If you have further questions or concerns about your mold, please shoot me a message on Etsy and I’ll get you taken care of.

PLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.

FINAL CAST DIMENSIONS
4" x 4" x 1"
6" x 6" x 1"
8" x 8" x 1"
9" x 9" x 1"
10" x 10" x 1"

This listing is for 1" Deep Square Molds. These molds are ULTRA Quality and Long Lasting!

We suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin/matte which directly transfers to your casting.

Please message us with any questions you may have regarding this mold.

**Please note this listing is for the silicone mold ONLY.

Our silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.

SILICONE MOLD CARE INSTRUCTIONS

• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.
• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.
• USE EXTREME CAUTION when using a torch/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.
• Make sure the resin is fully cured. Uncured resin may rip the mold.
• Please follow all safety precautions when using resin. It is very toxic.
• If you have further questions or concerns about your mold, please shoot me a message on Etsy and I’ll get you taken care of.

PLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.

• MULTIPURPOSE WHITE MICA POWDER VARIETY PACK – A small sample of our white pigment line and with some of our top sellers in the set!! This mica mineral powder set is ideal for DIY craft use, such as woodworking, resin art, plastics, slime making, powder-coating, homemade bath bombs and jewelry, melt & pour, lip balm, acrylic painting, screen printing, candle making, and more.

• ULTRA-FINE PURITY – Eye Candy mica pearls microns vary in size in this pack to better blend with resins, lacquer, epoxy, nail polish, latex, cosmetics, automotive paint, lotions, creams, polymer clay, varnishes, glazes, and other personal use items.

• ULTIMATE CRAFTING VERSALITY – Each color comes in (5) grams totaling (50) grams of Eye Candy Mica pearls which are made with the finest Mica, Titanium Dioxide. This is a great pack to have! Features colors such as Icicle, Snowflake, Frost White, Airi White, Aki White, Haku-gan White, Akoya White, Sayu White, Shide, and Shiro White.

• SAFE, NON-TOXIC, CRUELTY FREE – Our colors are stain-free but highly recommend using POLYSORBATE 80 for those making bath bombs, gentle on skin, and won’t cause irritation. As with any additive, always test a small area before full use to ensure it’s allergy safe.

• UNBEATABLE QUALITY AND CUSTOMER SERVICE - Unbeatable Quality and Customer Service – Eye Candy mica pearls are backed by superior quality assurance, purity, and fast, responsive support. Contact us with any questions or concerns to get reliable service you can count on.

    CALCULATIONS FOR MIXING OF OUR PIGMENTS

This is the most frequently question asked and rightfully so!! Unfortunately there's no standard calculation when mixing pigments due to the numerous applications, and mediums that our pigments can be used with. I.E. Automotive, Epoxy, Resin, Slime, Candles, Soaps, Fishing Lures, Woodworking, Pen Blanks, Acrylic, Varnish, Clay, Grout, Flooring, Countertops, Cosmetics, Fingernail Polish, etc. the list goes on. 

Other factors are based on the customer.  What is the desired look that you're trying to achieve, opaque or transparency?

Our standard for epoxy resin or automotive has been (1) container of our 50 gram pigment powder for every gallon. But, we have seen customers use MUCH less!! 

Starting out with 1g of pigment per 8 oz would be a safe start while adding more pigment as needed to achieve your desired outcome. 

• MULTIPURPOSE MICA POWDER VARIETY PACK – A small sample of our various pigments and with some of our top sellers in the set!! This mica mineral powder set is ideal for DIY craft use, such as woodworking, resin art, plastics, slime making, powder-coating, homemade bath bombs and jewelry, melt & pour, lip balm, acrylic painting, screen printing, candle making, and more.

• ULTRA-FINE PURITY – Eye Candy mica pearls microns vary in size in this pack to better blend with resins, lacquer, epoxy, nail polish, latex, cosmetics, automotive paint, lotions, creams, polymer clay, varnishes, glazes, and other personal use items.

• ULTIMATE CRAFTING VERSALITY – Each color comes in (5) grams totaling (50) grams of Eye Candy Mica pearls which are made with the finest Mica, Titanium Dioxide. This is a great pack to have! Features colors such as Busan Blue, Dark Ocean Blue, Dark Ocean Green, Kyoto Red, Rainbow Orange, Samurai Black, Shoyu, Velvet, Wisteria Purple, and Aztec Purple.

• SAFE, NON-TOXIC, CRUELTY FREE – Our colors are stain-free but highly recommend using POLYSORBATE 80 for those making bath bombs, gentle on skin, and won’t cause irritation. As with any additive, always test a small area before full use to ensure it’s allergy safe.

• UNBEATABLE QUALITY AND CUSTOMER SERVICE - Unbeatable Quality and Customer Service – Eye Candy mica pearls are backed by superior quality assurance, purity, and fast, responsive support. Contact us with any questions or concerns to get reliable service you can count on.

    CALCULATIONS FOR MIXING OF OUR PIGMENTS

This is the most frequently question asked and rightfully so!! Unfortunately there's no standard calculation when mixing pigments due to the numerous applications, and mediums that our pigments can be used with. I.E. Automotive, Epoxy, Resin, Slime, Candles, Soaps, Fishing Lures, Woodworking, Pen Blanks, Acrylic, Varnish, Clay, Grout, Flooring, Countertops, Cosmetics, Fingernail Polish, etc. the list goes on. 

Other factors are based on the customer.  What is the desired look that you're trying to achieve, opaque or transparency?

Our standard for epoxy resin or automotive has been (1) container of our 50 gram pigment powder for every gallon. But, we have seen customers use MUCH less!! 

Starting out with 1g of pigment per 8 oz would be a safe start while adding more pigment as needed to achieve your desired outcome. 

• MULTIPURPOSE MICA POWDER VARIETY PACK – A small sample of our various pigments and with some of our top sellers in the set!! This mica mineral powder set is ideal for DIY craft use, such as woodworking, resin art, plastics, slime making, powder-coating, homemade bath bombs and jewelry, melt & pour, lip balm, acrylic painting, screen printing, candle making, and more.

• ULTRA-FINE PURITY – Eye Candy mica pearls microns vary in size in this pack to better blend with resins, lacquer, epoxy, nail polish, latex, cosmetics, automotive paint, lotions, creams, polymer clay, varnishes, glazes, and other personal use items.

• ULTIMATE CRAFTING VERSALITY – Each color comes in (5) grams totaling (50) grams of Eye Candy Mica pearls which are made with the finest Mica, Titanium Dioxide. This is a great pack to have! Features colors such as Ninja Black, Okinawa Blue, Okinawa Green, Olive yellow, Rainbow Blue, Suiren Purple, Macaw, Baku Red, 14k Nugget Gold, and Shide White.

• SAFE, NON-TOXIC, CRUELTY FREE – Our colors are stain-free but highly recommend using POLYSORBATE 80 for those making bath bombs, gentle on skin, and won’t cause irritation. As with any additive, always test a small area before full use to ensure it’s allergy safe.

• UNBEATABLE QUALITY AND CUSTOMER SERVICE - Unbeatable Quality and Customer Service – Eye Candy mica pearls are backed by superior quality assurance, purity, and fast, responsive support. Contact us with any questions or concerns to get reliable service you can count on.

    CALCULATIONS FOR MIXING OF OUR PIGMENTS

This is the most frequently question asked and rightfully so!! Unfortunately there's no standard calculation when mixing pigments due to the numerous applications, and mediums that our pigments can be used with. I.E. Automotive, Epoxy, Resin, Slime, Candles, Soaps, Fishing Lures, Woodworking, Pen Blanks, Acrylic, Varnish, Clay, Grout, Flooring, Countertops, Cosmetics, Fingernail Polish, etc. the list goes on. 

Other factors are based on the customer.  What is the desired look that you're trying to achieve, opaque or transparency?

Our standard for epoxy resin or automotive has been (1) container of our 50 gram pigment powder for every gallon. But, we have seen customers use MUCH less!! 

Starting out with 1g of pigment per 8 oz would be a safe start while adding more pigment as needed to achieve your desired outcome. 

• MULTIPURPOSE PURPLE MICA POWDER VARIETY PACK – A small sample of our purple pigment line and with some of our top sellers in the set!! This mica mineral powder set is ideal for DIY craft use, such as woodworking, resin art, plastics, slime making, powder-coating, homemade bath bombs and jewelry, melt & pour, lip balm, acrylic painting, screen printing, candle making, and more.

• ULTRA-FINE PURITY – Eye Candy mica pearls microns vary in size in this pack to better blend with resins, lacquer, epoxy, nail polish, latex, cosmetics, automotive paint, lotions, creams, polymer clay, varnishes, glazes, and other personal use items.

• ULTIMATE CRAFTING VERSALITY – Each color comes in (5) grams totaling (50) grams of Eye Candy Mica pearls which are made with the finest Mica, Titanium Dioxide. This is a great pack to have! Features colors such as Jasmine, Sunfire Violet, Barney Purple, Kanpanyura, Kawachi Fuji, Purple Sage, Dark Ube, Suiren Violet, Purple Garden, and Rainbow Violet.

• SAFE, NON-TOXIC, CRUELTY FREE – Our colors are stain-free but highly recommend using POLYSORBATE 80 for those making bath bombs, gentle on skin, and won’t cause irritation. As with any additive, always test a small area before full use to ensure it’s allergy safe.

• UNBEATABLE QUALITY AND CUSTOMER SERVICE - Unbeatable Quality and Customer Service – Eye Candy mica pearls are backed by superior quality assurance, purity, and fast, responsive support. Contact us with any questions or concerns to get reliable service you can count on.

    CALCULATIONS FOR MIXING OF OUR PIGMENTS

This is the most frequently question asked and rightfully so!! Unfortunately there's no standard calculation when mixing pigments due to the numerous applications, and mediums that our pigments can be used with. I.E. Automotive, Epoxy, Resin, Slime, Candles, Soaps, Fishing Lures, Woodworking, Pen Blanks, Acrylic, Varnish, Clay, Grout, Flooring, Countertops, Cosmetics, Fingernail Polish, etc. the list goes on. 

Other factors are based on the customer.  What is the desired look that you're trying to achieve, opaque or transparency?

Our standard for epoxy resin or automotive has been (1) container of our 50 gram pigment powder for every gallon. But, we have seen customers use MUCH less!! 

Starting out with 1g of pigment per 8 oz would be a safe start while adding more pigment as needed to achieve your desired outcome. 

• MULTIPURPOSE MICA POWDER VARIETY PACK – A small sample of our black, brown, and grey pigment line and with some of our top sellers in the set!! This mica mineral powder set is ideal for DIY craft use, such as woodworking, resin art, plastics, slime making, powder-coating, homemade bath bombs and jewelry, melt & pour, lip balm, acrylic painting, screen printing, candle making, and more.

• ULTRA-FINE PURITY – Eye Candy mica pearls microns vary in size in this pack to better blend with resins, lacquer, epoxy, nail polish, latex, cosmetics, automotive paint, lotions, creams, polymer clay, varnishes, glazes, and other personal use items.

• ULTIMATE CRAFTING VERSALITY – Each color comes in (5) grams totaling (50) grams of Eye Candy Mica pearls which are made with the finest Mica, Titanium Dioxide. This is a great pack to have! Features colors such as Ronin Black, Kendo Brown, Japanese Steel Grey, Bokuto Brown, Carob Brown, Sendai Grey, Karummetou, Shadow Grey, Ninja Black, and Yoru Black.

• SAFE, NON-TOXIC, CRUELTY FREE – Our colors are stain-free but highly recommend using POLYSORBATE 80 for those making bath bombs, gentle on skin, and won’t cause irritation. As with any additive, always test a small area before full use to ensure it’s allergy safe.

• UNBEATABLE QUALITY AND CUSTOMER SERVICE - Unbeatable Quality and Customer Service – Eye Candy mica pearls are backed by superior quality assurance, purity, and fast, responsive support. Contact us with any questions or concerns to get reliable service you can count on.

    CALCULATIONS FOR MIXING OF OUR PIGMENTS

This is the most frequently question asked and rightfully so!! Unfortunately there's no standard calculation when mixing pigments due to the numerous applications, and mediums that our pigments can be used with. I.E. Automotive, Epoxy, Resin, Slime, Candles, Soaps, Fishing Lures, Woodworking, Pen Blanks, Acrylic, Varnish, Clay, Grout, Flooring, Countertops, Cosmetics, Fingernail Polish, etc. the list goes on. 

Other factors are based on the customer.  What is the desired look that you're trying to achieve, opaque or transparency?

Our standard for epoxy resin or automotive has been (1) container of our 50 gram pigment powder for every gallon. But, we have seen customers use MUCH less!! 

Starting out with 1g of pigment per 8 oz would be a safe start while adding more pigment as needed to achieve your desired outcome. 

• MULTIPURPOSE GREEN MICA POWDER VARIETY PACK – A small sample of our green pigment line and with some of our top sellers in the set!! This mica mineral powder set is ideal for DIY craft use, such as woodworking, resin art, plastics, slime making, powder-coating, homemade bath bombs and jewelry, melt & pour, lip balm, acrylic painting, screen printing, candle making, and more.

• ULTRA-FINE PURITY – Eye Candy mica pearls microns vary in size in this pack to better blend with resins, lacquer, epoxy, nail polish, latex, cosmetics, automotive paint, lotions, creams, polymer clay, varnishes, glazes, and other personal use items.

• ULTIMATE CRAFTING VERSALITY – Each color comes in (5) grams totaling (50) grams of Eye Candy Mica pearls which are made with the finest Mica, Titanium Dioxide. This is a great pack to have! Features colors such as Green Tea, Green Onion, Arashiyama Green, Chartreuse, Mint Green, Emerald Green, Kabosu, Forest Green, Nori Green, and Dark Ocean Green.

• SAFE, NON-TOXIC, CRUELTY FREE – Our colors are stain-free but highly recommend using POLYSORBATE 80 for those making bath bombs, gentle on skin, and won’t cause irritation. As with any additive, always test a small area before full use to ensure it’s allergy safe.

• UNBEATABLE QUALITY AND CUSTOMER SERVICE - Unbeatable Quality and Customer Service – Eye Candy mica pearls are backed by superior quality assurance, purity, and fast, responsive support. Contact us with any questions or concerns to get reliable service you can count on.

    CALCULATIONS FOR MIXING OF OUR PIGMENTS

This is the most frequently question asked and rightfully so!! Unfortunately there's no standard calculation when mixing pigments due to the numerous applications, and mediums that our pigments can be used with. I.E. Automotive, Epoxy, Resin, Slime, Candles, Soaps, Fishing Lures, Woodworking, Pen Blanks, Acrylic, Varnish, Clay, Grout, Flooring, Countertops, Cosmetics, Fingernail Polish, etc. the list goes on. 

Other factors are based on the customer.  What is the desired look that you're trying to achieve, opaque or transparency?

Our standard for epoxy resin or automotive has been (1) container of our 50 gram pigment powder for every gallon. But, we have seen customers use MUCH less!! 

Starting out with 1g of pigment per 8 oz would be a safe start while adding more pigment as needed to achieve your desired outcome. 

• MULTIPURPOSE BLUE MICA POWDER VARIETY PACK – A small sample of our blue pigment line and with some of our top sellers in the set!! This mica mineral powder set is ideal for DIY craft use, such as woodworking, resin art, plastics, slime making, powder-coating, homemade bath bombs and jewelry, melt & pour, lip balm, acrylic painting, screen printing, candle making, and more.

• ULTRA-FINE PURITY – Eye Candy mica pearls microns vary in size in this pack to better blend with resins, lacquer, epoxy, nail polish, latex, cosmetics, automotive paint, lotions, creams, polymer clay, varnishes, glazes, and other personal use items.

• ULTIMATE CRAFTING VERSALITY – Each color comes in (5) grams totaling (50) grams of Eye Candy Mica pearls which are made with the finest Mica, Titanium Dioxide. This is a great pack to have! Features colors such as Macaw, Blueblood, Carolina, Rainbow Blue, Nokon, Dark Ocean Blue, Okinawa Blue, Busan Blue, Ajisai Blue, and Aozora Blue.

• SAFE, NON-TOXIC, CRUELTY FREE – Our colors are stain-free but highly recommend using POLYSORBATE 80 for those making bath bombs, gentle on skin, and won’t cause irritation. As with any additive, always test a small area before full use to ensure it’s allergy safe.

• UNBEATABLE QUALITY AND CUSTOMER SERVICE - Unbeatable Quality and Customer Service – Eye Candy mica pearls are backed by superior quality assurance, purity, and fast, responsive support. Contact us with any questions or concerns to get reliable service you can count on.

    CALCULATIONS FOR MIXING OF OUR PIGMENTS

This is the most frequently question asked and rightfully so!! Unfortunately there's no standard calculation when mixing pigments due to the numerous applications, and mediums that our pigments can be used with. I.E. Automotive, Epoxy, Resin, Slime, Candles, Soaps, Fishing Lures, Woodworking, Pen Blanks, Acrylic, Varnish, Clay, Grout, Flooring, Countertops, Cosmetics, Fingernail Polish, etc. the list goes on. 

Other factors are based on the customer.  What is the desired look that you're trying to achieve, opaque or transparency?

Our standard for epoxy resin or automotive has been (1) container of our 50 gram pigment powder for every gallon. But, we have seen customers use MUCH less!! 

Starting out with 1g of pigment per 8 oz would be a safe start while adding more pigment as needed to achieve your desired outcome. 

ALWAYS TEST BEFORE FULL APPLICATION

DESCRIPTION

10K Gold Yellow is a bright vibrant yellow pigment and part of our Opulent Series. Our popular mica powder is ideal for DIY craft use, such as, epoxy, resin, woodworking, pen blanks, plastics, slime, watercolors, cosmetics, fishing lures, bath bombs, jewelry, melt and pour, lip balm, acrylic, polish, candle making, and MUCH more.

INGREDIENTS & PARTICLE SIZE

Particle size                   10-60   μm

Ingredients                     Fluorphlogopite, Titanium Dioxide, Iron Oxide

Heat Threshold              392 °F - 572 °F

ADDITIONAL DATA

EPOXY RATIOS

The most common question that we receive is "How much pigment per gallon of epoxy?". This is a very valid question and unfortunately there is no set answer due to the numerous types of applications and variations. This is why we recommend the 2 grams per 8 oz and add as desired.

For example:

• Are you looking for an opaque or transparent look? 
• Lighter colors may take more pigment to achieve the color.

Why micron sizes matter:

• PLEASE be aware of the micron sizes of the pigment. The larger the micron, the larger the particle.
• Typical pigments average 10-60um. 
• Be aware that larger micron sized pigments will most likely have a heavier density which will cause the pigment to sink faster in fresh epoxy such as deep pours.
• For example, our Icicle or 14k Nugget Gold is 200-700um and will most likely sink in fresh epoxy faster. 
• To alleviate sinking either let the epoxy settle up a little bit. Or, come back through your project to "stir" it a little more.

SOAPS RATIOS

AUTOMOTIVE / REMOVABLE PAINT RATIOS

Peelable Coatings:

• The majority of our pigments can be sprayed through a 1.2 tip
• Be aware of the micron size. The larger the particle you may have to go to a larger tip.
• The pigments can be mixed with the base color or mixed into the clear and sprayed over the base color.
• The base color may impact the overall color of the pigment.
• Light colored pigments yellows, pinks, etc., we recommend using a white base or a like colored base. 
• Dark colored pigments, we recommend using a black or dark colored base

Automotive Paint:

• The majority of our pigments can and have been used for automotive.
• The majority of our pigments can be sprayed through a 1.2 tip
• Three ways to use our pigments for spraying:
• Mix directly into the base color to create a unique blend
• Mix and spray with your mid clear over the base color
• Mix and spray with your top coat. Typically we do not recommend this due to the possibilities of striping. Also, we use the top coat as a UV protector or possible sanding of the top coat, etc.

ACRYLIC POURING RATIOS 

INDUSTRIAL, PLASTICS, & GLASS COATINGS RATIOS

GRAPHIC INKS & SCREEN PRINTING RATIOS

COSMETICS RATIOS

FIREARMS (CERAKOTE) RATIOS

 Photo Courtesy: crawlinzx14 / Picture shows Eye Candy Colorshift over a black base.

Our pigments can be used for both Cerakote and KG Gunkote clears. Below is just some references.

• 5 grams of pigment per 4oz
• Typically recommend a black base. For light colored pigments such as yellows, pinks, etc. you may want to try a light colored base. ALWAYS test before full application.
• 3 coats for full saturation. Some colors may require less.
• Stay with pigments with a 10-60um micron size. All particle sizes are listed on our product pages or you can find it on our Pigment Information List HERE. 
• Recommend using a .80 spray nozzle. Some use 1.0 for clears.

REQUEST SAFETY DATA SHEET (SDS)

To request a safety data sheet, please contact us here:  Jeff@eyecandycustomz.com

Looking for a high-quality silicone mold that's perfect for creating stunning castings? Look no further than Eye Candy Silicone & Molds' 10x10x3 square silicone mold. With its precise measurements and durable silicone material, this mold is the perfect tool for all your crafting needs.

High Quality Silicone

Made of high-quality silicone, this mold ensures precise measurements and durability, allowing you to create uniform castings that are sure to impress. And with its non-stick surface, you can easily release your finished product without damaging it.

Versatile Square Mold

Its versatile square shape allows you to experiment with different designs and textures, making it perfect for all kinds of crafting projects. Whether you're a professional or a hobbyist, this mold is a must-have tool for your collection.

Elevate Your Crafting with Eye Candy's 10x10x3 Square Silicone Mold

With its easy-to-clean surface, the 10x10x3 square silicone mold is a reliable tool that you can use for many crafting projects to come. Elevate your crafting and create stunning and unique serving boards with Eye Candy Silicone & Molds' 10x10x3 square silicone mold.

• MULTIPURPOSE GLOW IN THE DARK MICA POWDER VARIETY PACK – A perfect sample of our Glow in the Dark pigment line and with some of our top sellers in the set!! This mica mineral powder set is ideal for DIY craft use, such as woodworking, resin art, plastics, slime making, homemade bath bombs and jewelry, melt & pour, lip balm, acrylic painting, screen printing, candle making, and more.

• ULTRA-FINE PURITY – Eye Candy mica pearls microns vary in size in this pack to better blend with resins, lacquer, epoxy, nail polish, latex, cosmetics, automotive paint, lotions, creams, polymer clay, varnishes, glazes, and other personal use items.

• ULTIMATE CRAFTING VERSALITY – Each color comes in (2) or (5) grams sets of Eye Candy Mica pearls which are made with the finest ingredients. This is a great pack to have! Features colors such as Daijin Blue, Mizudori Green, Beni Red, Midori Green, Daidaiiro Orange, Orenji Orange, Momoiro Pink, Shojin Blue, Daitoku Purple, Daishin Yellow, and Asagi Yellow.

• SAFE, NON-TOXIC, CRUELTY FREE – Our colors are stain-free but highly recommend using POLYSORBATE 80 for those making bath bombs, gentle on skin, and won’t cause irritation. As with any additive, always test a small area before full use to ensure it’s allergy safe.

• UNBEATABLE QUALITY AND CUSTOMER SERVICE - Unbeatable Quality and Customer Service – Eye Candy mica pearls are backed by superior quality assurance, purity, and fast, responsive support. Contact us with any questions or concerns to get reliable service you can count on.

    CALCULATIONS FOR MIXING OF OUR PIGMENTS

This is the most frequently question asked and rightfully so!! Unfortunately there's no standard calculation when mixing pigments due to the numerous applications, and mediums that our pigments can be used with. I.E. Automotive, Epoxy, Resin, Slime, Candles, Soaps, Fishing Lures, Woodworking, Pen Blanks, Acrylic, Varnish, Clay, Grout, Flooring, Countertops, Cosmetics, Fingernail Polish, etc. the list goes on. 

If you're using these for epoxy resin projects and find that the pigments are "chunky" or difficult to break down, try putting the pigments in a cup and putting a little denatured alcohol over the pigments and stir. This should help solve the issue.

We do NOT recommend using these pigments for projects that will be consistently in the sun due to UV stability.

• MULTIPURPOSE GOLD MICA POWDER VARIETY PACK – A perfect sample of our Gold pigment line and with some of our top sellers in the set!! This mica mineral powder set is ideal for DIY craft use, such as woodworking, resin art, plastics, slime making, homemade bath bombs and jewelry, melt & pour, lip balm, acrylic painting, screen printing, candle making, and more.

• ULTRA-FINE PURITY – Eye Candy mica pearls microns vary in size in this pack to better blend with resins, lacquer, epoxy, nail polish, latex, cosmetics, automotive paint, lotions, creams, polymer clay, varnishes, glazes, and other personal use items.

• ULTIMATE CRAFTING VERSALITY – Each color comes in (2) or (5) grams sets of Eye Candy Mica pearls which are made with the finest ingredients. This is a great pack to have! Features colors such as 14k Nugget Gold, Chrysta Gold, Golda Gold, Kin Gold, Krysanthe Gold, Kula Gold, Ora Gold, Oria Gold, Shiba Gold, Taba Gold, and Zerrin Gold..

• SAFE, NON-TOXIC, CRUELTY FREE – Our colors are stain-free but highly recommend using POLYSORBATE 80 for those making bath bombs, gentle on skin, and won’t cause irritation. As with any additive, always test a small area before full use to ensure it’s allergy safe.

• UNBEATABLE QUALITY AND CUSTOMER SERVICE - Unbeatable Quality and Customer Service – Eye Candy mica pearls are backed by superior quality assurance, purity, and fast, responsive support. Contact us with any questions or concerns to get reliable service you can count on.

    CALCULATIONS FOR MIXING OF OUR PIGMENTS

This is the most frequently question asked and rightfully so!! Unfortunately there's no standard calculation when mixing pigments due to the numerous applications, and mediums that our pigments can be used with. I.E. Automotive, Epoxy, Resin, Slime, Candles, Soaps, Fishing Lures, Woodworking, Pen Blanks, Acrylic, Varnish, Clay, Grout, Flooring, Countertops, Cosmetics, Fingernail Polish, etc. the list goes on. 

Other factors are based on the customer.  What is the desired look that you're trying to achieve, opaque or transparency?

Our standard for epoxy resin or automotive has been (1) container of our 50 gram pigment powder for every gallon. But, we have seen customers use MUCH less!! 

Starting out with 1g of pigment per 8 oz would be a safe start while adding more pigment as needed to achieve your desired outcome. 

• MULTIPURPOSE IRREGULAR FLAKES VARIETY PACK – A great opportunity to acquire some of our Irregular Series flakes.  These flakes are irregular in size with a small amount of various other colors to give it that extra effect. Our irregular flakes are ideal for DIY craft use, such as, epoxy, resin, woodworking, pen blanks, plastics, tumblers, fishing lures, jewelry, acrylic, polish, and MUCH more.

• ULTRA-FINE PURITY – Eye Candy irregular flakes are just that, irregular in size.

• ULTIMATE CRAFTING VERSALITY – Each color comes in (2) grams of Eye Candy Shimmer Flakes. This is a great pack to have! Features colors such as Scarab Green, Hoi An Blue Lotus, Hibiscus Red, Sugar Plum, Azurite, Egyptian Star Red, Abalone Shell, Rose Quartz, Egyptian Blue, Morganite Red, and Silver Ankhs.

• SAFE, NON-TOXIC, CRUELTY FREE – Our all our irregular flakes, gentle on skin, and won’t cause irritation. As with any additive, always test a small area before full use to ensure it’s allergy safe.

• UNBEATABLE QUALITY AND CUSTOMER SERVICE - Unbeatable Quality and Customer Service – Eye Candy mica pearls are backed by superior quality assurance, purity, and fast, responsive support. Contact us with any questions or concerns to get reliable service you can count on.   

 CALCULATIONS FOR USING OUR FLAKES

This is the most frequently question asked and rightfully so!! Unfortunately there's no standard calculation when mixing flakes due to the numerous applications, and mediums that our flakes can be used with. I.E. Automotive, Epoxy, Fishing Lures, Woodworking, Pen Blanks, Acrylic, Varnish, Clay, Grout, Flooring, Countertops, Cosmetics, Fingernail Polish, etc. the list goes on. 

Automotive

• Do NOT recommend for automotive use due to size and longevity. 

Epoxy / Resin

• These can be used in epoxy resin deep pours BUT, PLEASE understand that due to the density of the flake, it will most likely sink in a fresh pour.  
• These flakes are great for using as accents on smaller pours or projects.

• MULTIPURPOSE NEON MICA POWDER VARIETY PACK – A perfect sample of our neon pigment line and with some of our top sellers in the set!! This mica mineral powder set is ideal for DIY craft use, such as woodworking, resin art, plastics, slime making, homemade bath bombs and jewelry, melt & pour, lip balm, acrylic painting, screen printing, candle making, and more.

• ULTRA-FINE PURITY – Eye Candy mica pearls microns vary in size in this pack to better blend with resins, lacquer, epoxy, nail polish, latex, cosmetics, automotive paint, lotions, creams, polymer clay, varnishes, glazes, and other personal use items.

• ULTIMATE CRAFTING VERSALITY – Each color comes in (2) or (5) grams sets of Eye Candy Mica pearls which are made with the finest ingredients. This is a great pack to have! Features colors such as Saturn Yellow, UFO Green, Arc Orange, Blaze Orange, Cosmic Red, Firebird Red, Flamingo Red, Plastic Pink, Magma Magenta, Electric Blue, and Proton Purple.

• SAFE, NON-TOXIC, CRUELTY FREE – Our colors are stain-free but highly recommend using POLYSORBATE 80 for those making bath bombs, gentle on skin, and won’t cause irritation. As with any additive, always test a small area before full use to ensure it’s allergy safe.

• UNBEATABLE QUALITY AND CUSTOMER SERVICE - Unbeatable Quality and Customer Service – Eye Candy mica pearls are backed by superior quality assurance, purity, and fast, responsive support. Contact us with any questions or concerns to get reliable service you can count on.

    CALCULATIONS FOR MIXING OF OUR PIGMENTS

This is the most frequently question asked and rightfully so!! Unfortunately there's no standard calculation when mixing pigments due to the numerous applications, and mediums that our pigments can be used with. I.E. Automotive, Epoxy, Resin, Slime, Candles, Soaps, Fishing Lures, Woodworking, Pen Blanks, Acrylic, Varnish, Clay, Grout, Flooring, Countertops, Cosmetics, Fingernail Polish, etc. the list goes on. 

If you're using these for epoxy resin projects and find that the pigments are "chunky" or difficult to break down, try putting the pigments in a cup and putting a little denatured alcohol over the pigments and stir. This should help solve the issue.

We do NOT recommend using these pigments for projects that will be consistently in the sun due to UV stability.

• MULTIPURPOSE OPULENT HIGH QUALITY MICA POWDER VARIETY PACK – A perfect sample of our high quality Opulent pigment line and with some of our top sellers in the set!! This mica mineral powder set is ideal for DIY craft use, such as woodworking, resin art, plastics, slime making, homemade bath bombs and jewelry, melt & pour, lip balm, acrylic painting, screen printing, candle making, and more.

• ULTRA-FINE PURITY – Eye Candy mica pearls microns vary in size in this pack to better blend with resins, lacquer, epoxy, nail polish, latex, cosmetics, automotive paint, lotions, creams, polymer clay, varnishes, glazes, and other personal use items.

• ULTIMATE CRAFTING VERSALITY – Each color comes in (2) or (5) grams sets of Eye Candy Mica pearls which are made with the finest ingredients. This is a great pack to have! Features colors such as Baku Red, Zaffre, Imperial Jade, Persian Purple, Periwinkle Purple, Crimson, Imperial Gold, Kakiiro Orange, Scarlet, Seijiiro Green, 10k Gold, and Cerise.

• SAFE, NON-TOXIC, CRUELTY FREE – Our colors are stain-free but highly recommend using POLYSORBATE 80 for those making bath bombs, gentle on skin, and won’t cause irritation. As with any additive, always test a small area before full use to ensure it’s allergy safe.

• UNBEATABLE QUALITY AND CUSTOMER SERVICE - Unbeatable Quality and Customer Service – Eye Candy mica pearls are backed by superior quality assurance, purity, and fast, responsive support. Contact us with any questions or concerns to get reliable service you can count on.

    CALCULATIONS FOR MIXING OF OUR PIGMENTS

This is the most frequently question asked and rightfully so!! Unfortunately there's no standard calculation when mixing pigments due to the numerous applications, and mediums that our pigments can be used with. I.E. Automotive, Epoxy, Resin, Slime, Candles, Soaps, Fishing Lures, Woodworking, Pen Blanks, Acrylic, Varnish, Clay, Grout, Flooring, Countertops, Cosmetics, Fingernail Polish, etc. the list goes on. 

Other factors are based on the customer.  What is the desired look that you're trying to achieve, opaque or transparency?

Our standard for epoxy resin or automotive has been (1) container of our 50 gram pigment powder for every gallon. But, we have seen customers use MUCH less!! 

Starting out with 1g of pigment per 8 oz would be a safe start while adding more pigment as needed to achieve your desired outcome. 

Final Cast Dimensions:
Each half is approximately 13" x 6"
Deep: 1.25"
Surface Finish: Smooth/Shiny/Glossy

Acrylic Template: Exact size of final casting

Final Cut Template: 1/8" undersized to trim excess resin.

This listing is for a Round Romeo & Juliet Serving Board Set Silicone Mold. This one mold will produce 2 pieces which will nest together perfectly. 

This listing features an optional precision laser-cut acrylic router template, designed to be the simplest, most accurate, and repeatable solution for shaping wood or wood-resin pieces into charcuterie boards, serving trays, handles, functional art, and more.

These versatile templates allow you to either trace the pattern for rough-cutting or use them directly with a flush trim router bit for clean, precise shaping. It's an essential woodworking tool that streamlines your workflow, reducing production time while maintaining accuracy and consistency.

The final cut template allows you to take your casting out of the mold and flush trim any resin that seeped around the wood. This speeds up production time and reduces post sanding work.

We suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin/matte which directly transfers to your casting.

Please message us with any questions you may have regarding this mold.

**Please note this listing is for the silicone mold ONLY.

Our silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.

SILICONE MOLD CARE INSTRUCTIONS

• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.
• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.
• USE EXTREME CAUTION when using a torch/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.
• Make sure the resin is fully cured. Uncured resin may rip the mold.
• Please follow all safety precautions when using resin. It is very toxic.
• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.

PLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.

Final Cast Dimensions:
Diameter: 12"
Length with Handle: 15.5"

Depth: 1.25"

Surface Finish: Smooth/Shiny/Glossy

Acrylic Template: Exact size of final casting

Final Cut Template: 1/8" undersized to trim excess resin.

This listing is for a Deep Charcuterie Board Mold. 

Resin work and photo courtesy of @bupp_woodworks and @rockpaperesin

This listing features an optional precision laser-cut acrylic router template, designed to be the simplest, most accurate, and repeatable solution for shaping wood or wood-resin pieces into charcuterie boards, serving trays, handles, functional art, and more.

These versatile templates allow you to either trace the pattern for rough-cutting or use them directly with a flush trim router bit for clean, precise shaping. It's an essential woodworking tool that streamlines your workflow, reducing production time while maintaining accuracy and consistency.

The final cut template allows you to take your casting out of the mold and flush trim any resin that seeped around the wood. This speeds up production time and reduces post sanding work.

We suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin/matte which directly transfers to your casting. 

Please message us with any questions you may have regarding this mold.

**Please note this listing is for the silicone mold ONLY.

Our silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.

SILICONE MOLD CARE INSTRUCTIONS

• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.
• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.
• USE EXTREME CAUTION when using a torch/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.
• Make sure the resin is fully cured. Uncured resin may rip the mold.
• Please follow all safety precautions when using resin. It is very toxic.
• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.

PLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.

Final Cast Dimensions:
Tall: 12"
Width: 12"
Deep: 1.25"
Surface Finish: Smooth/Shiny/Glossy

Acrylic Template: Exact size of final casting

Final Cut Template: 1/8" undersized to trim excess resin.

This listing is for a Round Cheese Board Silicone Mold with 1 Integrated Handle. This would make a great Serving Tray too.

This listing features an optional precision laser-cut acrylic router template, designed to be the simplest, most accurate, and repeatable solution for shaping wood or wood-resin pieces into charcuterie boards, serving trays, handles, functional art, and more.

These versatile templates allow you to either trace the pattern for rough-cutting or use them directly with a flush trim router bit for clean, precise shaping. It's an essential woodworking tool that streamlines your workflow, reducing production time while maintaining accuracy and consistency.

The final cut template allows you to take your casting out of the mold and flush trim any resin that seeped around the wood. This speeds up production time and reduces post sanding work.

We suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin/matte which directly transfers to your casting.

Please message us with any questions you may have regarding this mold.

**Please note this listing is for the silicone mold ONLY.

Our silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.

SILICONE MOLD CARE INSTRUCTIONS

• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.
• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.
• USE EXTREME CAUTION when using a torch/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.
• Make sure the resin is fully cured. Uncured resin may rip the mold.
• Please follow all safety precautions when using resin. It is very toxic.
• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.

PLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.

Final Cast Dimensions:
Tall: 12"
Width: 6.5"
Deep: 1.25"
Surface Finish: Smooth/Shiny/Glossy

Acrylic Template: Exact size of final casting

Final Cut Template: 1/8" undersized to trim excess resin.

This listing is for a Beer Can Board Silicone Mold. So many options with this mold.  It can be used as a cheese board or also as wall decor.  

This listing features an optional precision laser-cut acrylic router template, designed to be the simplest, most accurate, and repeatable solution for shaping wood or wood-resin pieces into charcuterie boards, serving trays, handles, functional art, and more.

These versatile templates allow you to either trace the pattern for rough-cutting or use them directly with a flush trim router bit for clean, precise shaping. It's an essential woodworking tool that streamlines your workflow, reducing production time while maintaining accuracy and consistency.

The final cut template allows you to take your casting out of the mold and flush trim any resin that seeped around the wood. This speeds up production time and reduces post sanding work.

We suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin/matte which directly transfers to your casting.

Please message us with any questions you may have regarding this mold.

**Please note this listing is for the silicone mold ONLY.

Our silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.

SILICONE MOLD CARE INSTRUCTIONS

• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.
• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.
• USE EXTREME CAUTION when using a torch/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.
• Make sure the resin is fully cured. Uncured resin may rip the mold.
• Please follow all safety precautions when using resin. It is very toxic.
• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.

PLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.

• MULTIPURPOSE COPPER BRONZE MICA POWDER VARIETY PACK – A perfect sample of our Copper and Bronze pigment line and with some of our top sellers in the set!! This mica mineral powder set is ideal for DIY craft use, such as woodworking, resin art, plastics, slime making, homemade bath bombs and jewelry, melt & pour, lip balm, acrylic painting, screen printing, candle making, and more.

• ULTRA-FINE PURITY – Eye Candy mica pearls microns vary in size in this pack to better blend with resins, lacquer, epoxy, nail polish, latex, cosmetics, automotive paint, lotions, creams, polymer clay, varnishes, glazes, and other personal use items.

• ULTIMATE CRAFTING VERSALITY – Each color comes in (2) or (5) grams sets of Eye Candy Mica pearls which are made with the finest ingredients. This is a great pack to have! Features colors such as Yasuya Copper, Penny Copper, Shinba Copper, Shu Copper, Aki Copper, Kiwi Copper, Iwa Copper, Motoka Bronze, Vibrant Bronze, Seidou Bronze, Aki Bronze, Bronze, and Kaiya Bronze.

• SAFE, NON-TOXIC, CRUELTY FREE – Our colors are stain-free but highly recommend using POLYSORBATE 80 for those making bath bombs, gentle on skin, and won’t cause irritation. As with any additive, always test a small area before full use to ensure it’s allergy safe.

• UNBEATABLE QUALITY AND CUSTOMER SERVICE - Unbeatable Quality and Customer Service – Eye Candy mica pearls are backed by superior quality assurance, purity, and fast, responsive support. Contact us with any questions or concerns to get reliable service you can count on.

    CALCULATIONS FOR MIXING OF OUR PIGMENTS

This is the most frequently question asked and rightfully so!! Unfortunately there's no standard calculation when mixing pigments due to the numerous applications, and mediums that our pigments can be used with. I.E. Automotive, Epoxy, Resin, Slime, Candles, Soaps, Fishing Lures, Woodworking, Pen Blanks, Acrylic, Varnish, Clay, Grout, Flooring, Countertops, Cosmetics, Fingernail Polish, etc. the list goes on. 

Other factors are based on the customer.  What is the desired look that you're trying to achieve, opaque or transparency?

Our standard for epoxy resin or automotive has been (1) container of our 50 gram pigment powder for every gallon. But, we have seen customers use MUCH less!! 

Starting out with 1g of pigment per 8 oz would be a safe start while adding more pigment as needed to achieve your desired outcome. 

• MULTIPURPOSE MICA POWDER VARIETY PACK – Our Pastel Series Pigments are just that, pastel. These colors typically have a TWO warm colors in one pigment which work together well. These individual colors are absolutely stunning and a must have if you're looking for something unique.

• ULTRA-FINE PURITY – Eye Candy mica pearls microns vary in size in this pack to better blend with resins, lacquer, epoxy, nail polish, latex, cosmetics, automotive paint, lotions, creams, polymer clay, varnishes, glazes, and other personal use items.

• ULTIMATE CRAFTING VERSALITY – Each color comes in (2) and (5) grams packs of Eye Candy Mica pearls which are made with the finest Mica, Titanium Dioxide. This is a great pack to have!

• 5 gram Set: Adzuki-iro Red, Aizome Blue, Gage Green, Hanada Turquoise, Kamenbudokai, Koga Gold, Murasaki Violet, Namari Grey, Rose Gold, Ryujin Blue, & Ukon Brown

• SAFE, NON-TOXIC, CRUELTY FREE – Our colors are stain-free but highly recommend using POLYSORBATE 80 for those making bath bombs, gentle on skin, and won’t cause irritation. As with any additive, always test a small area before full use to ensure it’s allergy safe.

• UNBEATABLE QUALITY AND CUSTOMER SERVICE - Unbeatable Quality and Customer Service – Eye Candy mica pearls are backed by superior quality assurance, purity, and fast, responsive support. Contact us with any questions or concerns to get reliable service you can count on.

    CALCULATIONS FOR MIXING OF OUR PIGMENTS

This is the most frequently question asked and rightfully so!! Unfortunately there's no standard calculation when mixing pigments due to the numerous applications, and mediums that our pigments can be used with. I.E. Automotive, Epoxy, Resin, Slime, Candles, Soaps, Fishing Lures, Woodworking, Pen Blanks, Acrylic, Varnish, Clay, Grout, Flooring, Countertops, Cosmetics, Fingernail Polish, etc. the list goes on. 

Other factors are based on the customer.  What is the desired look that you're trying to achieve, opaque or transparency?

Our standard for epoxy resin or automotive has been (1) container of our 50 gram pigment powder for every gallon. But, we have seen customers use MUCH less!! 

Starting out with 1g of pigment per 8 oz would be a safe start while adding more pigment as needed to achieve your desired outcome. 

• MULTIPURPOSE METALLIC FLAKES VARIETY PACK – A great opportunity to acquire some of our Shimmer Series flakes.  These metallic flakes have a base color with a small amount of various other colors to give it that extra shimmering effect. Our metallic flakes are automotive grade but is also ideal for DIY craft use, such as, epoxy, resin, woodworking, pen blanks, plastics,  fishing lures, jewelry, acrylic, polish, and MUCH more.

• ULTRA-FINE PURITY – Eye Candy metallic flakes are .004 HEX. Solvent and UV resistant. Can withstand up to 350 degrees F..

• ULTIMATE CRAFTING VERSALITY – Each color comes in (2) grams of Eye Candy Shimmer Flakes. This is a great pack to have! Features colors such as Alien Green, Banarasi, Harvest Gold, Battleship, Leprechaun, Black Widow, Periwinkle, Mermaid, Las Vegas, Purple Haze, Torch Red, Purple Rain, and Mauvelous.

• SAFE, NON-TOXIC, CRUELTY FREE – Our metallic flakes, gentle on skin, and won’t cause irritation. As with any additive, always test a small area before full use to ensure it’s allergy safe..

• UNBEATABLE QUALITY AND CUSTOMER SERVICE - Unbeatable Quality and Customer Service – Eye Candy mica pearls are backed by superior quality assurance, purity, and fast, responsive support. Contact us with any questions or concerns to get reliable service you can count on.   

 CALCULATIONS FOR USING OUR FLAKES

This is the most frequently question asked and rightfully so!! Unfortunately there's no standard calculation when mixing flakes due to the numerous applications, and mediums that our flakes can be used with. I.E. Automotive, Epoxy, Fishing Lures, Woodworking, Pen Blanks, Acrylic, Varnish, Clay, Grout, Flooring, Countertops, Cosmetics, Fingernail Polish, etc. the list goes on. 

Automotive

• If you're spraying these flakes for automotive use, we recommend using a 1.7 mm tip. 
• Will NOT work with an airbrush gun due to flake and nozzle size.

Epoxy / Resin

• These can be used in epoxy resin deep pours BUT, PLEASE understand that due to the density of the flake, it will most likely sink in a fresh pour.  

Final Cast Dimensions:
Tall: 13"
Width: 11.5"
Deep: 1.25"
Surface Finish: Smooth/Shiny/Glossy

Acrylic Template: Exact size of final casting

Final Cut Template: 1/8" undersized to trim excess resin.

This listing is for a heart shaped serving board silicone mold that has an integrated heart shaped handle hole.

This listing features an optional precision laser-cut acrylic router template, designed to be the simplest, most accurate, and repeatable solution for shaping wood or wood-resin pieces into charcuterie boards, serving trays, handles, functional art, and more.

These versatile templates allow you to either trace the pattern for rough-cutting or use them directly with a flush trim router bit for clean, precise shaping. It's an essential woodworking tool that streamlines your workflow, reducing production time while maintaining accuracy and consistency.

The final cut template allows you to take your casting out of the mold and flush trim any resin that seeped around the wood. This speeds up production time and reduces post sanding work.

We suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin/matte which directly transfers to your casting.

Please message us with any questions you may have regarding this mold.

**Please note this listing is for the silicone mold ONLY.

Our silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.

SILICONE MOLD CARE INSTRUCTIONS

• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.
• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.
• USE EXTREME CAUTION when using a torch/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.
• Make sure the resin is fully cured. Uncured resin may rip the mold.
• Please follow all safety precautions when using resin. It is very toxic.
• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.

PLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.

Final Cast Dimensions:
Tall: 14"
Width: 8.25"
Deep: 1.25"
Surface Finish: Smooth/Shiny/Glossy

Acrylic Template: Exact size of final casting

Final Cut Template: 1/8" undersized to trim excess resin.

This listing is for a Genie Charcuterie Board Silicone Mold or Cheese Board Mold.

This listing features an optional precision laser-cut acrylic router template, designed to be the simplest, most accurate, and repeatable solution for shaping wood or wood-resin pieces into charcuterie boards, serving trays, handles, functional art, and more.

These versatile templates allow you to either trace the pattern for rough-cutting or use them directly with a flush trim router bit for clean, precise shaping. It's an essential woodworking tool that streamlines your workflow, reducing production time while maintaining accuracy and consistency.

The final cut template allows you to take your casting out of the mold and flush trim any resin that seeped around the wood. This speeds up production time and reduces post sanding work.

We suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin/matte which directly transfers to your casting.

Please message us with any questions you may have regarding this mold.

**Please note this listing is for the silicone mold ONLY.

Our silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.

SILICONE MOLD CARE INSTRUCTIONS

• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.
• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.
• USE EXTREME CAUTION when using a torch/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.
• Make sure the resin is fully cured. Uncured resin may rip the mold.
• Please follow all safety precautions when using resin. It is very toxic.
• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.

PLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.

Final Cast Dimensions:

CHESSBOARD:
Length: 14.5"
Width: 14.5"
Overall Depth: .75"
Outside Border Width: 3/8"
Surface Finish: Smooth/Shiny/Glossy

INDIVIDUAL SQUARES
Height: 1.5"
Width: 1.5"
Depth: .25"
Border Between Squares: .2"

CHESS PIECES
King (Slanted Rectangle): 3.5" x 1" x 1"
Queen (Pointed Rectangle): 3.5" x 1" x 1"
Bishop (Cone): 2 3/4" x 7/8"
Knight (Cylinder): 3" x 1"
Rook (Octagon): 2 3/8" x 7/8"
Pawn (Cone): 2 3/4" x 7/8"
Surface Finish: Smooth/Shiny/Glossy

Chess Piece Set

1 Chess piece set will make 16 pieces or half the amount for a full board. You can purchase 1 chess piece set and reuse the mold or purchase 2 which allows you to make all the pieces at once.

This chessboard mold measures approximately 14.5" × 14.5" × .75" overall and produces a finished board with a total thickness of 3/4". Each full-size square is 1.5" × 1.5" and is recessed to a depth of 0.25". 

The board layout features 1.5" squares divided by .2" wide grid lines, all set at a 0.25" depth. This design makes it easy to cast bold, substantial squares using alternating colors of resin. After the individual squares have cured, a final backing pour can be added to lock everything together, forming the solid base of the board. The resulting cast piece finishes at a full 3/4" thick.

After demolding, you have several finishing options: leave the grid lines as-is, fill them with a contrasting material, or sand the surface and apply a full flood coat for a seamless chess or checkers board finish.

Please message us with any questions you may have regarding this mold.

**Please note this listing is for the silicone mold ONLY.

Our silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.

SILICONE MOLD CARE INSTRUCTIONS

• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.
• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.
• USE EXTREME CAUTION when using a torch/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.
• Make sure the resin is fully cured. Uncured resin may rip the mold.
• Please follow all safety precautions when using resin. It is very toxic.
• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.

PLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.

Final Cast Dimensions:
Tall: 14.6"
Width: 12"
Deep: 1.25"
Surface Finish: Smooth/Shiny/Glossy

Acrylic Template: Exact size of final casting

Final Cut Template: 1/8" undersized to trim excess resin.

This listing is for a Teardrop Charcuterie Board Silicone Mold. This mold has an embedded round handle hole at the top of the teardrop.

This listing features an optional precision laser-cut acrylic router template, designed to be the simplest, most accurate, and repeatable solution for shaping wood or wood-resin pieces into charcuterie boards, serving trays, handles, functional art, and more.

These versatile templates allow you to either trace the pattern for rough-cutting or use them directly with a flush trim router bit for clean, precise shaping. It's an essential woodworking tool that streamlines your workflow, reducing production time while maintaining accuracy and consistency.

The final cut template allows you to take your casting out of the mold and flush trim any resin that seeped around the wood. This speeds up production time and reduces post sanding work.

We suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin/matte which directly transfers to your casting.

Please message us with any questions you may have regarding this mold.

**Please note this listing is for the silicone mold ONLY.

Our silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.

SILICONE MOLD CARE INSTRUCTIONS

• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.
• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.
• USE EXTREME CAUTION when using a torch/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.
• Make sure the resin is fully cured. Uncured resin may rip the mold.
• Please follow all safety precautions when using resin. It is very toxic.
• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.

PLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.

ALWAYS TEST BEFORE FULL APPLICATION

DESCRIPTION

14K Nugget Gold is a popular and beautiful large super light and fluffy metallic pigment. A great pigment for accents on projects. Our popular mica powder is ideal for DIY craft use, such as, epoxy, resin, woodworking, pen blanks, plastics, slime, watercolors, cosmetics, fishing lures, bath bombs, jewelry, melt and pour, lip balm, acrylic, polish, candle making, and MUCH more.

INGREDIENTS & PARTICLE SIZE

Particle size                     200-700 μm

Ingredients                      Fluorphlogopite, Titanium Dioxide, Iron Oxide

Heat Threshold               1000 °F - 1832 °F

ADDITIONAL DATA

EPOXY RATIOS

The most common question that we receive is "How much pigment per gallon of epoxy?". This is a very valid question and unfortunately there is no set answer due to the numerous types of applications and variations. This is why we recommend the 2 grams per 8 oz and add as desired.

For example:

• Are you looking for an opaque or transparent look? 
• Lighter colors may take more pigment to achieve the color.

Why micron sizes matter:

• PLEASE be aware of the micron sizes of the pigment. The larger the micron, the larger the particle.
• Typical pigments average 10-60um. 
• Be aware that larger micron sized pigments will most likely have a heavier density which will cause the pigment to sink faster in fresh epoxy such as deep pours.
• For example, our Icicle or 14k Nugget Gold is 200-700um and will most likely sink in fresh epoxy faster. 
• To alleviate sinking either let the epoxy settle up a little bit. Or, come back through your project to "stir" it a little more.

SOAPS RATIOS

AUTOMOTIVE / REMOVABLE PAINT RATIOS

Peelable Coatings:

• The majority of our pigments can be sprayed through a 1.2 tip
• Be aware of the micron size. The larger the particle you may have to go to a larger tip.
• The pigments can be mixed with the base color or mixed into the clear and sprayed over the base color.
• The base color may impact the overall color of the pigment.
• Light colored pigments yellows, pinks, etc., we recommend using a white base or a like colored base. 
• Dark colored pigments, we recommend using a black or dark colored base

Automotive Paint:

• The majority of our pigments can and have been used for automotive.
• The majority of our pigments can be sprayed through a 1.2 tip
• Three ways to use our pigments for spraying:
• Mix directly into the base color to create a unique blend
• Mix and spray with your mid clear over the base color
• Mix and spray with your top coat. Typically we do not recommend this due to the possibilities of striping. Also, we use the top coat as a UV protector or possible sanding of the top coat, etc.

ACRYLIC POURING RATIOS 

INDUSTRIAL, PLASTICS, & GLASS COATINGS RATIOS

GRAPHIC INKS & SCREEN PRINTING RATIOS

COSMETICS RATIOS

FIREARMS (CERAKOTE) RATIOS

 Photo Courtesy: crawlinzx14 / Picture shows Eye Candy Colorshift over a black base.

Our pigments can be used for both Cerakote and KG Gunkote clears. Below is just some references.

• 5 grams of pigment per 4oz
• Typically recommend a black base. For light colored pigments such as yellows, pinks, etc. you may want to try a light colored base. ALWAYS test before full application.
• 3 coats for full saturation. Some colors may require less.
• Stay with pigments with a 10-60um micron size. All particle sizes are listed on our product pages or you can find it on our Pigment Information List HERE. 
• Recommend using a .80 spray nozzle. Some use 1.0 for clears.

REQUEST SAFETY DATA SHEET (SDS)

To request a safety data sheet, please contact us here:  Jeff@eyecandycustomz.com

• MULTIPURPOSE MICA POWDER VARIETY PACK – A great sample pack showing our popular Hue Series of pigments and which include some of our top sellers This mica mineral powder set is ideal for DIY craft use, such as woodworking, resin art, plastics, slime making, powder-coating, homemade bath bombs and jewelry, melt & pour, lip balm, acrylic painting, screen printing, candle making, and more.

• ULTRA-FINE PURITY – Eye Candy mica pearls microns vary in size in this pack to better blend with resins, lacquer, epoxy, nail polish, latex, cosmetics, automotive paint, lotions, creams, polymer clay, varnishes, glazes, and other personal use items.

• ULTIMATE CRAFTING VERSALITY – Each color comes in (2) and (5) grams packs of Eye Candy Mica pearls which are made with the finest Mica, Titanium Dioxide. This is a great pack to have!

• 2 gram set: Cherry Red, Candy Red, Jasmine, Chartreuse, Purple Sage, Violence Violet, Watermelon, Barney Purple, Iceburg Blue, Purple Jam, Blueblood, Valentine, Aztec Purple, Green Onion, Blue Orchid, Green Day, Rusty, Nebula Green, Beetle Blue, and Macaw

• 5 gram Set: Violence Violet, Green Day, Jasmine, Aztec Purple, Nebula Green, Chartruese, Iceburg Blue, Green Onion, Beetle Blue, Purple Jam, Blue Orchid, Valentine Red, Candy Red, Rusty, and Macaw.

• SAFE, NON-TOXIC, CRUELTY FREE – Our colors are stain-free but highly recommend using POLYSORBATE 80 for those making bath bombs, gentle on skin, and won’t cause irritation. As with any additive, always test a small area before full use to ensure it’s allergy safe.

• UNBEATABLE QUALITY AND CUSTOMER SERVICE - Unbeatable Quality and Customer Service – Eye Candy mica pearls are backed by superior quality assurance, purity, and fast, responsive support. Contact us with any questions or concerns to get reliable service you can count on.

    CALCULATIONS FOR MIXING OF OUR PIGMENTS

This is the most frequently question asked and rightfully so!! Unfortunately there's no standard calculation when mixing pigments due to the numerous applications, and mediums that our pigments can be used with. I.E. Automotive, Epoxy, Resin, Slime, Candles, Soaps, Fishing Lures, Woodworking, Pen Blanks, Acrylic, Varnish, Clay, Grout, Flooring, Countertops, Cosmetics, Fingernail Polish, etc. the list goes on. 

Other factors are based on the customer.  What is the desired look that you're trying to achieve, opaque or transparency?

Our standard for epoxy resin or automotive has been (1) container of our 50 gram pigment powder for every gallon. But, we have seen customers use MUCH less!! 

Starting out with 1g of pigment per 8 oz would be a safe start while adding more pigment as needed to achieve your desired outcome. 

• MULTIPURPOSE MICA POWDER VARIETY PACK – A great opportunity to acquire all of our Ghost colors.  See why some of these are our top sellers. This mica mineral powder set is ideal for DIY craft use, such as woodworking, resin art, plastics, slime making, powder-coating, homemade bath bombs and jewelry, melt & pour, lip balm, acrylic painting, screen printing, candle making, and more.

• ULTRA-FINE PURITY – Eye Candy mica pearls microns vary in size in this pack to better blend with resins, lacquer, epoxy, nail polish, latex, cosmetics, automotive paint, lotions, creams, polymer clay, varnishes, glazes, and other personal use items.

• THREE VARIANCES - Our Ghost pigment line-up come in our usual Gold, Red, Violet, Blue, and Green.
  
  Ghost Series - These are our standard Ghost pigments that are 10-60um particle size.
  Glimmer Ghost - These pigments are 40-200um particle size which brings that little extra sparkle to a project..
  Galactic Ghost - This series of pigments come in 200-800um particle sizes. If you are familiar with our Icicle or 14k Nugget Gold, imagine the same but in our Ghost pigments.

• ULTIMATE CRAFTING VERSALITY – Each color comes in (5) grams totaling (75) grams of Eye Candy Mica pearls which are made with the finest Mica, Titanium Dioxide. This is a great pack to have! Features colors such as Ghost Gold, Ghost Red, Ghost Blue, Ghost Green, Ghost Violet, Glimmer Ghost Gold, Glimmer Ghost Red, Glimmer Ghost Blue, Glimmer Ghost Green, Glimmer Ghost Violet, Galactic Ghost Gold, Galactic Ghost Red, Galactic Ghost Blue, Galactic Ghost Green, and Galactic Ghost Violet.

• SAFE, NON-TOXIC, CRUELTY FREE – Our colors are stain-free but highly recommend using POLYSORBATE 80 for those making bath bombs, gentle on skin, and won’t cause irritation. As with any additive, always test a small area before full use to ensure it’s allergy safe.

• UNBEATABLE QUALITY AND CUSTOMER SERVICE - Unbeatable Quality and Customer Service – Eye Candy mica pearls are backed by superior quality assurance, purity, and fast, responsive support. Contact us with any questions or concerns to get reliable service you can count on.

    CALCULATIONS FOR MIXING OF OUR PIGMENTS

This is the most frequently question asked and rightfully so!! Unfortunately there's no standard calculation when mixing pigments due to the numerous applications, and mediums that our pigments can be used with. I.E. Automotive, Epoxy, Resin, Slime, Candles, Soaps, Fishing Lures, Woodworking, Pen Blanks, Acrylic, Varnish, Clay, Grout, Flooring, Countertops, Cosmetics, Fingernail Polish, etc. the list goes on. 

Other factors are based on the customer.  What is the desired look that you're trying to achieve, opaque or transparency?

If you're spraying this pigment, I.E. Automotive, Peelable Paint, etc. the color of the base will greatly effect the final color of the Ghost Pigment.

Our standard for epoxy resin or automotive has been (1) container of our 50 gram pigment powder for every gallon. But, we have seen customers use MUCH less!! 

Starting out with 1g of pigment per 8 oz would be a safe start while adding more pigment as needed to achieve your desired outcome. 

• MULTIPURPOSE ULTRASHIFT MICA POWDER VARIETY PACK – A small sample of our famous UltraShift chameleon pigment line. These are HIGH quality pigments. This mica mineral powder set is ideal for DIY craft use, such as woodworking, resin art, plastics, slime making, powder-coating, homemade bath bombs and jewelry, melt & pour, lip balm, acrylic painting, screen printing, candle making, and more.

• ULTRA-FINE PURITY – Eye Candy mica pearls microns vary in size in this pack to better blend with resins, lacquer, epoxy, nail polish, latex, cosmetics, automotive paint, lotions, creams, polymer clay, varnishes, glazes, and other personal use items.

• ULTIMATE CRAFTING VERSALITY – Each color comes in (1) gram totaling (15) grams of Eye Candy Mica pearls which are made with the finest Mica, Titanium Dioxide. This is a great pack to have! Features colors such as  Redrum, Tsunami, Torii, Kinomuna, Jurojin, Raiko, Ryu Dragon, Hotei, Ebisu, Komainu, Itsumade, Tanuki, Amabie, Benten, and Daikoku.

• SAFE, NON-TOXIC, CRUELTY FREE – Our colors are stain-free but highly recommend using POLYSORBATE 80 for those making bath bombs, gentle on skin, and won’t cause irritation. As with any additive, always test a small area before full use to ensure it’s allergy safe.

• UNBEATABLE QUALITY AND CUSTOMER SERVICE - Unbeatable Quality and Customer Service – Eye Candy mica pearls are backed by superior quality assurance, purity, and fast, responsive support. Contact us with any questions or concerns to get reliable service you can count on.

    CALCULATIONS FOR MIXING OF OUR PIGMENTS

Unfortunately there's no standard calculation when mixing pigments due to the numerous applications, and mediums that our pigments can be used with. I.E. Automotive, Epoxy, Resin, Slime, Candles, Soaps, Fishing Lures, Woodworking, Pen Blanks, Acrylic, Varnish, Clay, Grout, Flooring, Countertops, Cosmetics, Fingernail Polish, etc. the list goes on. 

These are not your typical pigments!! Takes only a little to achieve the color!!

Ultrashift pigments have the best results when there's a black base applied. 

- For automotive, for best results, first spray a black base and follow with the colorshift over top.  Recommend mixing the colorshift with your mid-clear but some choose to mix with their top coat.

- Molds, we are noticing that numerous artists is either putting a black in the mold first and then the colorshift or they are applying the colorshifts with a brush on method.

Other factors are based on the customer.  What is the desired look that you're trying to achieve, opaque or transparency?

Our standard for epoxy resin or automotive has been (5) grams of pigment powder for every gallon. But, we have seen customers use MUCH less!! 

Starting out with 1g of pigment per 8 oz would be a safe start while adding more pigment as needed to achieve your desired outcome.